Conventional / non-addressable fire detection systems

A conventional range of alarm panels are ideal for small to medium sized premises such as guesthouses, high street shops and light industrial units.

  • Zonemaster Zp1

    Zonemaster ZP1

    The Zonemaster ZP1 system offers an ideal solution for small to medium sized businesses

    • Available in 2, 4 and 8 zone variants
    • Flexibility to network between control panels
    • Supports multiple detection types
    • 4 & 8 zone panels with integrated Fire Brigade signalling controls

  • Zonemaster 100a

    Zonemaster 100A

    The Zonemaster 100A system offers an ideal solution for small to medium sized businesses

    • Available in 2, 4 and 8 zone variants
    • Supports multiple detection types
    • Zonemaster 100A detectors and call points are wired on separate circuits to sounders (two sounder circuits are provided).

  • Zonemaster 100at

    Zonemaster 100AT

    The Zonemaster 100AT system offers an ideal solution for small to medium sized businesses

    • Available in 2, 4 and 8 zone variants
    • Supports multiple detection types
    • Zonemaster 100AT detectors, call points and sounders are wired to the same pair of cables, commonly referred to as a two-wire system.
    • Wiring sounders to the detection circuits eliminates the need to install sounder circuit cables and also offers the ability to provide zoned or two stage sounder operation.

  • Ziton ZC Smoke Heat Detection

    Ziton ZC series

    The Ziton ZC range of smoke and heat detection is ideal for modern commercial and industrial interiors featuring solid or suspended ceilings. A high intensity red LED indicator situated on the detector moulding provides clear indication when the unit is in alarm.

    • Colour: Polar White
    • Low profile design
    • Detector head removal monitoring

  • Orbis Detector Range

    Orbis Series

    Orbis is a modern, stylish detector range packed with practical features that make installation, commissioning and maintenance easy and efficient. The new sensing and operating technologies improve operational reliability and false alarm rejection.

    The Orbis range includes:

    • Optical smoke detector
    • Multisensor smoke detector for detecting fast burning fires
    • A range of seven heat detectors to suit a wide variety of operating conditions

    Smoke detectors feature Drift Compensation with DirtAlert® to easily identify dirty detectors and all detectors provide extra confirmation of smoke before the alarm signal given to reduce false alarms.

  • Series 65 Detectors

    Series 65

    The Series 65 range of conventional detectors incorporates well-proven sensing technologies, together with advances in materials and electronics technology.  A wide operating voltage of 9 to 33V DC means that Series 65 detectors can be integrated into security systems when used with a relay base. 

    • Proven detection performance 
    • Available as Ionisation smoke detector, Optical smoke detector and a range of heat detectors.

  • ZC Manual Call Point

    Manual Call Points

    ZC Manual Call Point

    Designed for maximum reliability, ease of use and safety.  The units are activated simply by applying pressure to the laminated break glass ZC Weather Proof Call Point are designed for external applications with IP 67 rating.

  • Micra25 Micra100

    Micra 25® & Micra 100®

    The Micra 25® & Micra 100® aspirated smoke detectors draw air from within the protected area via a network of pipes to detect both the early aerosols and larger smoke particles produced by a fire.

    The system can be varied from high sensitivity for very early warning in electronic data processing applications to reduced sensitivity for hostile environments.

    • Micra 25® - 50m pipe length & 10 sample points
    • Micra 100® - 100m pipe length & 20 sample points
    • ClassiFire® Perceptive Artificial Intelligence system
    • Dust Discrimination and elimination system
    • Detectors can be networked together or interfaced to addressable fire detection systems or conventional fire alarms
    • Dynamic algorithms “ClassiFire” ensure that the detector operates at optimum sensitivity for the protected environment to reduce instances of false alarms

  • Stratos

    Stratos II®

    The Stratos HSSD2® aspirated smoke detectors draw air from within the protected area via a network of pipes to detect both the early aerosols and larger smoke particles produced by a fire.

    The system can be varied from high sensitivity for very early warning in electronic data processing applications to reduced sensitivity for hostile environments.

    • 4 x Pipe zones with 100m maximum single run (50m in moving air)
    • 200m Combined maximum length with 100 sample points
    • ClassiFire® Perceptive Artificial Intelligence system
    • Dust Discrimination and elimination system
    • Detectors can be networked together or interfaced to addressable fire detection systems or conventional fire alarms
    • Dynamic algorithms “ClassiFire” ensure that the detector operates at optimum sensitivity for the protected environment to reduce instances of false alarms

  • Fireray 3000 Infrared Optical Beam Smoke Detector

    End to End

    The Fireray® 3000 End to End Infrared Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also ideally suited to applications where access to ceiling mounted smoke detectors presents practical difficulties.

    Key Benefits:

    • Allows for 2 Detectors per system controller
    • Range 5 to 120 metres, configurable per set of detectors
    • Integral laser alignment in receiver
    • 2-wire interface between controller and receiver
    • Separate fire and fault relays per detector
    • Low level controler with LCD display
    • Programmable sensitivity and fire/fault delay
    • Automatic Gain Control (AGC) for drift compensation
    • First fix concept for transmitter, receiver and controller
    • Multiple cable gland knockouts for ease of wiring
    • Transmitter can be powered from controller
    • Patented Light Cancellation Technology (LCT) cancels unwanted light, including sunlight, sodium lamps and fluorescent lighting.

  • Fire Beam

    Reflective

    Developed to overcome the problems of old outdated technology in beam detection, this motorised beam enables beam detection to be used reliably to produce cost effective solutions for protecting large areas.  

    Building movement and accessibility have in the past, made beam detection unreliable, difficult, time consuming to commission and hard to maintain, but now by using the advanced motorised technology of the firebeam means this is no longer a problem.   The firebeam will self align itself to the centre of the reflector when commissioning and will automatically keep alignment with the reflector when building movement occurs. This intelligent motorisation will mean less false alarms therefore saving time, resources, reputations and ultimately money.

    • Commission the beam from ground level
    • Manually move the beam head
    • View the air quality
    • View the status of the beam
    • Change sensitivity thresholds
    • Change the time to fire and fault
    • Make the alarm latching or non latching
    • Turn on and off the green flashing light
    • See fire and fault counts
    • See how much compensation has been made for dirt build up (you will only have to clean the head and reflector when it needs it)
    • Complete a self-test
    • Turn the beam on and off (it will reset itself after 8 hours)
    • Adjust output and receiver settings
    • Monitor the temperature at the beam head

  • Sounders and Visual Alarms

    Sounders & Visual Alarms

    Chubb's audible and visual warning devices provide a comprehensive range of high quality, high performance products.  Compliant with EN54-23 the beacons & sounder beacons provide wide area illumination and audible signaling.

  • Silent Alert Fire Safe System

    Silent Alert

    The Silent Alert Fire Safe system offers service providers a simple and cost effective way to providing fire alarm cover for people who are deaf within public buildings and workplaces.  Silent Alert links directly to your existing Fire Alarm system and is triggered automatically when the Fire Alarm is activated.  These factors help to keep ongoing costs low and helps service providers fulfil their obligations under the Disability Discrimination Act.

    Silent Alert is compliant with all relevant parts of :

    • BS5839-1 2013.  Fire detection and fire alarm systems for buildings.
    • EN BS54-25 2008.  Standard for Fire Detection & Fire Alarm systems which use RF (radio links) to communicate.

  • Deafgard

    Deafgard

    Deafgard is a wire free, moveable and acoustically activated bedside unit that incorporates an epilepsy friendly strobe and a connected vibrating-pad that, when placed under the pillow, vibrates to wake the sleeper upon the fire alarm sounding.

  • Power Supplies

    Power Supplies

    Suitable for charging a range of sealed lead acid batteries, the powers supply feature complete monitoring of primary and secondary power sources with fully temperature compensated battery charging and battery high impedance monitoring.

  • Transformer

    Transformers

    The unregulated transformer rectifiers are suitable for powering a range of field devices and are ideal for use with retainers. The units contain an internal relay allowing the load output to be switched off upon actuation of an external contactor or the application of 24Vdc. On power off the load output is automatically cut off, making it ideal for fail-safe door retaining applications.

    Features include:

    • 2 and 4 amp versions available
    • Features a green LED to indicate mains present
    • Features an amber LED to indicate a fault

  • Devices to hold doors open

    Door Hold Open Devices

    The Cranford Controls® range of door retainers has been designed to meet a wide range of applications across the Fire and Security industries. They are available with either plastic or metal bodies for either floor, wall or pole mounting.

    Features include:

    • Manual release button
    • Keeper plate
    • Rapid and easy installation
    • Additional accessory products available
    • Vandal proof versions are also available