Skip to main content
kemblok-duo-banner
Respirex hazmat and decontamination

Respirex International is a leading supplier of personal protective solutions, specialising in high-performance chemical, particulate and respiratory protective clothing and specialist protective footwear.

The Respirex product range encompasses standard and customised gas tight suits, chemical splash suits and Chemical, Biological, Radiological and Nuclear (CBRN) equipment for fire and emergency services teams and emergency responders, air fed chemically protective suits and chemical work wear for the petrochemical and pharmaceutical industries, and powered air and air fed particulate suits and hoods for nuclear and pharmaceutical industries.

gtb-vlam-suit
GTB in Laminate Viton®

The fully encapsulating GTB is a Type 1A - ET reusable gas tight suit covering both the wearer and breathing apparatus. Manufactured in Respirex's new Laminate Viton® material, the suit is lightweight and provides advanced chemical protection. The laminate Viton® material consists of a polyester fabric coated one side with orange fireproof DuPont™ Viton® and one side with grey thermoplastic with an insert barrier film

Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - double flaps with a  hook and loop fastener are fitted to cover the teeth of the zip

Rigid double layer visor permitting clear undistorted vision

Fixed or detachable Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996

Dual glove system consisting of a chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection

Gloves fitted using the Respirex Locking cuff or new SureLoc cuff mechanism, allowing the user to easily change the gloves when necessary

  • Seams are stitched and double taped
  • Adjustable internal support belt enables wearers of varying sizes to use the suit comfortably
  • Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute
  • Optional pass-through fitted to enable supplementary air to be passed (via an airline) to the second-man attachment on the user’s breathing apparatus
  • Leak-tightness test to EN464 prior to dispatch
  • Annual pressure test required (or after each use)

    DuPont™ and Viton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company

    Hazmax™ is a registerd trademark of Respirex International Limited

gtb-vbv-suit
GTB suits in Viton®/Butyl/Viton®

The fully encapsulating GTB is a Type 1A - ET reusable gas tight suit covering both the wearer and breathing apparatus. Manufactured in a premium fabric coated in DuPont™ Viton® in high visibility orange that provides excellent chemical protection and is the hardest wearing fabric option in the GTB suit range.

  • Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - double flaps with a hook and loop fastener are fitted to cover the teeth of the zip
  • Fixed or detachable Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996 or Integral socks with outer splash guards as an option
  • Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection
  • Gloves fitted using the Respirex Locking cuff or new SureLoc cuff mechanism, allowing the user to easily change the gloves when necessary
  • Seams are stitched and double taped
  • Rigid double layer visor permitting clear undistorted vision
  • Adjustable internal support belt enables wearers of varying sizes to use the suit comfortably
  • Exhalation valves ensure that the pressure change within the suit does not exceed one millibar in one minute
  • Optional pass-through fitted to enable supplementary air to be passed (via an airline) to the second-man attachment on the user’s breathing apparatus
  • Leak-tightness test to EN464 prior to dispatch
  • Annual pressure test required

DuPont™ and Viton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company

Hazmax™ is a registerd trademark of Respirex International Limited

limited-life-gas-suit
Limited life suit

Gas-tight suits protect emergency responders and chemical workers from dangerous and toxic chemicals in liquid or gaseous form and are used in areas that are considered immediately dangerous to life and health (IDLH).

Our Type 1A suits are designed for Self-Contained Breathing Apparatus (SCBA) worn inside the suit, which provides the greatest protection to the emergency responder and simplifies decontamination after an incident. Type 1B suits for SCBA worn externally are also available and can be useful when working in a confined area, as the SCBA cylinder can be slipped off the shoulders and passed forward. Type 1C suits provide breathing air via an air-line and are commonly used in industrial applications.

We offer a range of chemical protective suits for emergency team use, which are certified to EN 943-2:2002(ET), as well as industrial use suits which are certified to EN 943-1:2002.

All suits are leak-tightness tested to EN464 prior to dispatch.

gtl-suit
GTL lightweight suit

The fully encapsulating GTL is a Type 1A - ET single use gas-tight suit designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The GTL suit is manufactured in Chemprotex™ 400, the latest Respirex material, which is a high performance chemical barrier, multi-layer nonwoven fabric, in a high visibility yellow colour. This suit represents the latest in Gas Suit protection and is lighter in weight than suits currently available.

  • Fully encapsulating design to allow breathing apparatus to be worn inside the suit
  • Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip
  • Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort
  • Flexible, multi-laminated, anti-mist visor giving clear undistorted vision
  • Seams welded and taped for maximum performance
  • Chemically protective laminated glove welded to the suit material with an elasticated over sleeve to prevent splash entering the supplied neoprene outer gloves
  • Integral socks with outer splash guards
  • Tested to EN464 prior to despatch for leak-tightness

The Respirex GTL gas-tight suit can be used with the PermaSURE toxicity modelling app, allowing emergency responders to quickly establish the maximum safe working time with a given chemical based on real world conditions.

Chemprotex™ is a registered trademark of Respirex International Limited
gtim-suit
GTIM Type 1 suit

The GTIM is a Type 1B reusable gas tight suit designed to be used with self contained breathing apparatus worn externally and is manufactured in a range of chemically resistant fabrics.

  • Supplied with a face seal, or a permanently bonded facemask
  • Heavy duty 122cm (48”) long gas tight zip, fitted diagonally from left shoulder to right thigh, complete with storm flap.
  • Fixed or detachable Hazmax™ safety boots
  • Dual glove system consisting of a chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection
  • Gloves fitted using the Respirex Locking cuff or new SureLoc cuff mechanism, allowing the user to easily change the gloves when necessary
  • Seams are stitched and double taped
  • Exhalation valves ensure that the pressure change within the suit does not exceed 400 Pascals in one minute
  • Leak-tightness test to EN464 prior to dispatch
  • Annual pressure test required

Hazmax™ is a registered trademark of Respirex International Limited

gta-suit-black
GTA reusable gas tight suit

The GTA is a Type 1C reusable gas tight suit designed to be used with an external compressed air source and is manufactured in a range of chemically resistant fabrics.

  • Designed for long duration usage in harmful atmospheres
  • Breathing air and ventilation system completely contained within the suit
  • An audible warning device designed to activate if the airflow drops below the minimum level required to maintain CO2 below 1%
  • Heavy duty 122cm (48”) long gas tight zip, fitted vertically down the right hand side of the suit
  • Fixed or detachable Hazmax™ safety boots
  • Gloves compatible with the choice of suit material are fitted using the Respirex locking cuff mechanism or new SureLoc cuff mechanism, allowing the user to easily change the gloves when necessary
  • Seams are stitched and double taped
  • Adjustable internal support belt enables wearers of varying sizes to use the suit comfortably
  • Exhalation valves ensure that the pressure change within the suit does not exceed 400 Pascals in one minute
  • Three-point hanging system to prevent damage during storage
  • Leak-tightness test to EN464:1994 prior to dispatch
  • Pressure test required after each use

Hazmax™ is a registered trademark of Respirex International Limited

gls300a
GLS300A

The GLS 300A suit in Chemprotex™ 300 is a single use fully encapsulating gas-tight chemical protection suit covering both the wearer and the breathing apparatus. The suit combines the benefits of a lightweight high-performance chemical barrier fabric with a gas-tight construction to method 2 of ISO 17491-1. It incorporates attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip.

  • Large laminated anti-mist visor giving clear undistorted vision
  • Twin exhalation valves to side of hood to ensure that the suit maintains a comfortable working pressure
  • Lightweight gas-tight zip fitted to rear of suit, closing at the top and covered with a double storm flap with Velcro® brand hook and loop fastener
  • Chemically protective anti-static glove attached to the suit material
  • Integral socks in Chemprotex™ 300 material with splash-guard outer legs allowing the wearing of customer’s own boots. (Boots not included)
  • Must be worn with ESD footwear to ensure a conductive path to ground [when used in potentially explosive atmospheres]
gls300b
GLS300B

The GLS 300B suit in Chemprotex™ 300 is a single use gas-tight chemical protection suit designed for use with breathing apparatus worn outside the suit, a facemask and filter or airline respirator. The suit combines the benefits of a lightweight high-performance chemical barrier fabric with a gas-tight construction to method 2 of ISO 17491-1. It incorporates permanently attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip.

  • One-piece construction
  • Integral hood with patented facemask seal providing a type 3 liquid jet seal with an outer chemical barrier fabric. Please see list of approved facemasks.
  • Lightweight gas-tight zip fitted across the shoulders in rear of suit, with double external cover flaps with a Velcro® brand hook and loop fastener
  • Chemically protective anti-static glove attached to the suit material
  • Integral socks in Chemprotex™ 300 material with splash-guard outer legs allowing the wearing of customer’s own boots. (Boots not included)
  • Must be worn with ESD footwear to ensure a conductive path to ground [when used in potentially explosive atmospheres]
gls300c
GLS300C

The GLS 300C suit in Chemprotex™ 300 is a single use air-fed gas-tight chemical protection suit for use with breathable air supplied from an external compressed air source providing positive pressure.

The suit combines the benefits of a lightweight high-performance chemical barrier fabric with a gas-tight construction to method 2 of ISO 17491-1. It incorporates permanently attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip.

  • Semi-rigid laminated visor
  • Lightweight gas-tight zip fitted across the chest covered by double external storm flaps with Velcro® brand hook and loop fastener
  • Chemically protective anti-static glove attached to the suit material
  • Integral socks in Chemprotex™ 300 material with splash-guard outer legs allowing the wearing of customer’s own boots. (Boots not included)
  • Must be worn with ESD footwear to ensure a conductive path to ground [when used in potentially explosive atmospheres]
  • The air distribution system in the hood and air permeable collar provide cooling air through the suit, making the wearer more comfortable and better able to focus on tasks
  • For use with Bartels Rieger two piece air control valve (ref. RVD039W), supplied separately
  • The hood design provides high protection without the need for a tight-fitting face piece, which means:
  • Many wearers feel less constricted
  • Can be used by wearers with facial hair or glasses
  • Training needs are reduced
  • Face-fit testing is not required
prps-suit
PRPS powered respirator protective suit

The Respirex Powered Respirator Protective Suit (PRPS) is a one piece gas tight chemical protective suit for use by emergency response personnel after a CBRN incident.

  • Manufactured from DuPont™ Tychem® TK, a high performance, lightweight, multi-layer chemical barrier material
  • Respiratory system comprising a battery powered 3M Jupiter air filter unit fitted with a visual display unit mounted inside the suit at the base of the visor, and audible alarm
  • Battery pack provides 1 hour operational use, plus 15 minutes for decontamination
  • Twin JRF-85 gas particle filters to provide protection against chemical and biological warfare agents
  • Semi-rigid laminated visor
  • Heavy duty gas tight zip fitted across the chest enclosed by double external storm flaps with hook and loop fastener
  • Dual glove system comprising Neoprene outer gloves bonded to inner Silver Shield laminate gloves
  • Gas tight locking cuff mechanism
  • Highly chemically resistant Hazmax™ safety boots permanently attached to suit
  • Supplied with lightweight disposable Hazbag to quarantine the suit after use
  • Available in a range of sizes

DuPont™ and Tychem® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Hazmax™ is a registered trademark of Respirex International Ltd.

sc1-limited-life-suit
Limited life SC1 suits

The SC1 in Chemprotex™ 300 material is a single use Type 3, Type 4 and Type 5 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter.

The garment is CE certified to EN14605:2005 and A1:2009, EN13982-1:2004 and A1:2010, EN14126:2003, EN1073-2:2002 and EN1149-5:2008 and is intended for use in areas that are not immediately dangerous to life or health.

  • One-piece construction
  • Integral hood with neoprene rubber face grommet to seal around the wearer’s face mask
  • 91cm (36”) Nylon zip fitted across the shoulders in rear of suit, flapped internally and encased in a double external housing with self adhesive tape closure
  • Chemically protective laminated glove welded to the suit material
  • Supplied with Mapa M420 neoprene outer gloves
  • Integral socks in the same Chemprotex™ 300 material as the suit with plain outer leg allowing the wearing of customer’s own boots. (Boots not included)

The Respirex SC1 splash suit in Chemprotex™ 300 can be used with the PermaSURE toxicity modelling app, allowing emergency responders to quickly establish the maximum safe working time with a given chemical based on real world conditions.

hazmax-boot
Hazmax boots

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance.

Boot Shaft

  • Green Hazmax chemically resistant compound shaft certified to EN 13832-3
  • Conforms to EN 943-1 (Chemical protective clothing)
  • 200 Joule Epoxy coated Steel toe cap
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Knitted nylon lining
  • Moisture absorbing insole (removable and machine washable)
  • Also available in black (MOQ of 500 pairs)

Boot Sole

  • Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Stainless steel, penetration resistant mid-sole
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C
  • Energy absorbing tunnel system
  • Cold insulation
chemical-overboot
Chemical overboots

A chemically protective anti-static overboot with a vulcanized rubber sole for superior slip resistance.

Boot Shaft

  • Ingenious rear entry design ensures the boot is quick and easy to fit and remove
  • Ideal for personnel who have to continually enter and exit hazardous areas
  • Green Hazmax chemically resistant compound shaft certified to EN 13832
  • Conforms to EN 943-1 (Chemical protective clothing)
  • Meets the requirements of NFPA 1991 (Chemical Vapour protection)
  • Seamless construction
  • Kick off lug
  • CE marked on the shaft with date and year of manufacture
  • REACH Compliant

Boot Sole

  • Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C
sc1-reusable-suit
SC1 reusable splash suit

The Respirex SC1 is a reusable Type 3 splash contamination suit designed for Self Contained Breathing Apparatus (SCBA) worn externally.

  • One piece construction with integral hood incorporating a face seal that is both shaped and flexible, which provides a tight seal around the breathing apparatus face mask, preventing liquid penetration
  • Horizontal 91cm (36”) zip positioned across the rear shoulders of the garment with storm flaps secured by a hook and loop fastener to prevent ingress of liquids. Can also be fitted with a gas tight zip for certain applications
  • Double layer of material at the rear to prevent wear caused by the breathing apparatus rubbing against the suit
  • Elasticated inner legs with stirrups with elasticated outer legs designed to accommodate safety boots of the user’s choice
  • Safety gloves compatible with the material of the suit, fitted by means of the Respirex locking cuff mechanism, or the Sure-Loc mechanism

Materials

  • Butyl
  • Neoprene
  • C2 PVC
sc4-reusable-suit
SC4 reusable splash suit

The Respirex SC4 is a fully encapsulating reusable Type 3 splash contamination suit designed for Self Contained Breathing Apparatus (SCBA) worn inside the suit.

  • Flexible visor giving wide undistorted field of vision
  • Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit
  • Adjustable internal support belt allows users of varying sizes to wear the suit comfortably
  • Elasticated inner legs with stirrups with elasticated outer legs designed to accommodate safety boots of the user’s choice
  • Safety gloves compatible with the material of the suit, fitted by means of the Respirex locking cuff mechanism, or the Sure-Loc mechanism
  • Exhalation valves ensure that the pressure change within the suit does not exceed 400 Pascals in one minute
  • Available in a range of chemical resistant fabrics

Materials

  • Butyl
  • Neoprene
  • C2 PVC
sc4-limited-life-suit
SC4 limited life suit

The SC4 in Chemprotex™ 300 material is a single use fully encapsulating Type 3 (liquid-tight) splash contamination suit covering both the wearer and self-contained breathing apparatus.

The garment is CE certified to EN14605:2005 and A1:2009, EN14126:2003 and EN1149-5:2008.

  • Laminated anti-mist visor giving clear undistorted vision
  • Single exhalation valve to side of hood to ensure that the pressure change within the suit does not exceed 400 Pascals in one minute
  • 117cm (46”) fine tooth zip fitted to rear of suit, closing at bottom complete with single storm flap and self-adhesive closure strip
  • Chemically protective laminated gloves welded to the suit material
  • Supplied with Mapa M420 neoprene outer gloves
  • Integral socks in Chemprotex™ 300 material with plain outer leg allowing the wearing of customer’s own boots. (Boots not included)

The Respirex SC4 splash suit in Chemprotex™ 300 can be used with the PermaSURE toxicity modelling app, allowing emergency responders to quickly establish the maximum safe working time with a given chemical based on real world conditions.

sc1-limited-life-suit
SC1 limited life suits

The SC1 in Chemprotex™ 300 material is a single use Type 3, Type 4 and Type 5 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter.

The garment is CE certified to EN14605:2005 and A1:2009, EN13982-1:2004 and A1:2010, EN14126:2003, EN1073-2:2002 and EN1149-5:2008 and is intended for use in areas that are not immediately dangerous to life or health.

  • One-piece construction
  • Integral hood with neoprene rubber face grommet to seal around the wearer’s face mask
  • 91cm (36”) Nylon zip fitted across the shoulders in rear of suit, flapped internally and encased in a double external housing with self adhesive tape closure
  • Chemically protective laminated glove welded to the suit material
  • Supplied with Mapa M420 neoprene outer gloves
  • Integral socks in the same Chemprotex™ 300 material as the suit with plain outer leg allowing the wearing of customer’s own boots. (Boots not included)

The Respirex SC1 splash suit in Chemprotex™ 300 can be used with the toxicity modelling app, allowing emergency responders to quickly establish the maximum safe working time with a given chemical based on real world conditions.

simplair-tank-suit
Simplair A.E. tank suits

A reusable Type 2 ‘non-gas-tight’ chemical protective suit designed for use with breathable air supplied from an external compressed air source providing positive pressure.

  • Air system completely contained within the suit that provides breathing and cooling air to the user
  • An audible warning device designed to activate if the airflow drops below the minimum level required to maintain CO2 below 1%
  • Available in a range of chemical resistant fabrics
  • An adjustable waist belt supports the air system and is fitted with a foam back pad for increased comfort
  • Sufficient exhalation valves to ensure that the pressure change within the blouse does not exceed 1mBar in 1 minute
  • A wide, durable rigid PVC visor giving a high degree of undistorted vision
  • Three point hanging system which helps prevent distortion during storage
  • Heavy duty 122cm (48”) long liquid tight zip, fitted vertically down the right hand side of the suit
  • Cuff options: Locking cuff; Soft cuff; Double elasticated; Elasticated inner and straight outer; ’O’ ring.
  • Leg options: Double elasticated with stirrup or removable Hazmax boot
  • Gloves that are compatible with the suit material
  • A wide range of approved airline couplings can be fitted to the suit, however it is recommended that large bore couplings are used
  • Optional lifting eye.
simplair-ae-suit-two
Simplair A.E. suits

A reusable Type 2 ‘non-gas-tight’ chemical protective suit designed for use with breathable air supplied from an external compressed air source providing positive pressure.

  • Air system completely contained within the suit that provides breathing and cooling air to the user
  • An audible warning device designed to activate if the airflow drops below the minimum level required to maintain CO2 below 1%
  • Available in a range of chemical resistant fabrics
  • An adjustable waist belt supports the air system and is fitted with a foam back pad for increased comfort
  • Exhalation valves ensure that the pressure change within the suit does not exceed 400 Pascals in one minute
  • A durable rigid PVC visor giving a high degree of undistorted vision, with optional removable visor, or a lightweight, totally transparent PVC hood enabling 360°vision
  • Optional three-point hanging system which helps prevent distortion during storage
  • Zip options fitted across the chest include 36” water tight or double slide nylon zip.
  • Zip flap options with the above include: Plain; hook and loop fastener; Press stud fastening.
  • Cuff options: Locking cuff; Soft cuff; Double elasticated; Elasticated inner and straight outer; ’O’ ring.
  • Leg options: Double elasticated with stirrup; Single elasticated with stirrup and straight outer; Integral sock; Fixed boot or removable boot.
  • Gloves that are compatible with the suit material
  • A wide range of approved airline couplings can be fitted to the suit, however it is recommended that large bore couplings are used.
airprotex-af-suit
Airprotex AF limited life air fed chemical suit

Type 2 non-gas-tight one-piece suit is a single use garment with a reusable, removable air system that provides the highest level of protection against particulate contamination.

  • Manufactured in flame retardant, blue tinted, anti-static 300µm PVC or blue Chemprotex™ 300, a highly chemically resistant barrier laminate
  • For use with AF-429 regulator and breathing pack (see below) which are easily removable for re-use
  • For use with breathable air-supplied from an external compressed air source providing positive pressure
  • Cooling system, completely contained within the garment, provides cooling air to the user after connection to AF-429
  • Short air-line ‘tail’ for taping to hose
  • Noise level within the suit
  • Welded, chemically protective, laminated glove on Chemprotex™ 300 suits, O-ring cuff on PVC suits
  • Sock feet with outer leg for use with external boots or ant-slip feet with ankle ties for internal footwear
  • Front entry with zip flap
  • Clear visor with horizontal and vertical fields of vision
  • Four exhalation valves fitted with covers
  • Available sizes: Small, Medium, Large, X-Large and XX-Large
simplair-hood
Simplair A.E. hood

The Simplair A.E. Hood designed for use with breathable air supplied from an external compressed air source providing positive pressure.

  • Provides partial body protection and is designed to be worn in conjunction with other suitable items of protective clothing
  • Air system contained within the hood provides breathing air to the wearer with an audible warning device designed to activate if the airflow drops below the minimum level required to keep CO2 levels below 1%
  • Available in a range of chemical resistant fabrics
  • Front & rear cape panels provide protection to well below the wearer’s chest area
  • Air system is supported by an adjustable waist belt, fitted with a foam back pad for maximum wearer comfort
  • Twin exhalation valves
  • A durable rigid PVC visor giving a high degree of undistorted vision, with optional removable visor
  • Optional particulate filter
  • Optional three point hanging system which helps prevent distortion during storage
  • Worn in conjunction with a chemical protective jacket and trousers (or a chemical protective one-piece suit), gloves and safety boots, the complete outfit meets the performance requirements for ventilated and non-ventilated, non-gas-tight EN467:1995 (TYPE 2) protective clothing.
simplair-ae-suit
Simplair A.E. 360 hood

The Simplair A.E. Hood designed for use with breathable air supplied from an external compressed air source providing positive pressure.

  • Provides partial body protection and is designed to be worn in conjunction with other suitable items of protective clothing
  • Air system contained within the hood provides breathing air to the wearer with an audible warning device designed to activate if the airflow drops below the minimum level required to keep CO2 levels below 1%
  • Available in a range of chemical resistant fabrics
  • Front & rear cape panels provide protection to well below the wearer’s chest area
  • Air system is supported by an adjustable waist belt, fitted with a foam back pad for maximum wearer comfort
  • Twin exhalation valves
  • Lightweight, totally transparent PVC hood enabling 360° vision
  • Optional particulate filter
  • Optional three point hanging system which helps prevent distortion during storage
  • Worn in conjunction with a chemical protective jacket and trousers (or a chemical protective one-piece suit), gloves and safety boots, the complete outfit meets the performance requirements for ventilated and non-ventilated, non-gas-tight EN467:1995 (TYPE 2) protective clothing.
prps-suit
PRPS powered respirator protective suit

The Respirex Powered Respirator Protective Suit (PRPS) is a one piece gas tight chemical protective suit for use by emergency response personnel after a CBRN incident.

  • Manufactured from DuPont™ Tychem® TK, a high performance, lightweight, multi-layer chemical barrier material
  • Respiratory system comprising a battery powered 3M Jupiter air filter unit fitted with a visual display unit mounted inside the suit at the base of the visor, and audible alarm
  • Battery pack provides 1 hour operational use, plus 15 minutes for decontamination
  • Twin JRF-85 gas particle filters to provide protection against chemical and biological warfare agents
  • Semi-rigid laminated visor
  • Heavy duty gas tight zip fitted across the chest enclosed by double external storm flaps with hook and loop fastener
  • Dual glove system comprising Neoprene outer gloves bonded to inner Silver Shield laminate gloves
  • Gas tight locking cuff mechanism
  • Highly chemically resistant Hazmax™ safety boots permanently attached to suit
  • Supplied with lightweight disposable Hazbag to quarantine the suit after use
  • Available in a range of sizes

DuPont™ and Tychem® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Hazmax™ is a registered trademark of Respirex International Ltd.

rjs-suit
RJS respiratory and chemical protective suit

The RJS 300 Chemical Respirator Suit is a one-piece Type 3 chemical protective suit for use in hazardous industrial and emergency response environments.

Manufactured from Chemprotex™ 300, a high performance, lightweight, chemical barrier fabric the RJS suit protects the wearer against a broad range of industrial chemicals and other agents found in civil emergency situations.

Suit Features:

  • Air drawn through the filters enters through a breathing tube in the hood and exits through exhaust valves in the knees, providing a cooling air stream across the body
  • Chest zip with double storm flap and hook and loop fastener - no taping is required to seal
  • Chemically protective laminated glove welded to the suit material, with elasticated over-sleeve for use with gloves providing mechanical protection without the need for taping of gloves
  • Integral sock foot with elasticated outer leg allows the user to choose their own boots without compromising the level of protection
  • Head-up display in the hood indicates turbo status, hours used and any warnings
  • Suit achieves a Type 3 classification without the need for taping at the zip flap, sleeves or ankles, simplifying the donning and doffing process.
flo-pod-suit
FLO-POD™ suit

The Flo-Pod suit is a single piece particulate suit for use with the Flo-Pod Powered Respirator, available in a range of materials.

  • Manufactured in either lightweight 150 micron PVC, heavy duty 300 micron PVC or Chemprotex™ 300 (for chemical and infective agent protection)
  • Available in Small, Medium, Large and X-Large sizes
  • Elasticated draw-string neck seal
  • Horizontal zip on chest with resealable (hook and loop fastener) cover flap
  • Passes a type 3 jet test without taping the zip flap
  • Range of cuff and foot options
  • Low pressure balanced exhalation valves developed for maximum protection
  • Can be worn by users with glasses or facial hair
  • Wide field of vision.
flo-pod-hood
FLO-POD™ hood in pvc

A lightweight PVC Hood designed for use with the Flo-Pod powered respirator.

  • Manufactured in 150 micron PVC
  • Balanced single sized design for performance and comfort
  • Elasticated draw-string neck seal
  • Adjustable chest strap with quick release buckle
  • Low pressure balanced exhalation valves developed for maximum protection
  • More comfortable than a facemask and filter
  • Can be worn by users with glasses or facial hair
  • Wide field of vision
  • With the Flo-Pod™ removed the hood can be washed and re-used.
flo-pod-respirator-unit
FLO-POD™ powered respirator unit

The Flo-Pod is a simple to use powered air respirator for use against fine dust or particulate spray. Powered by a belt mounted rechargeable battery pack the Flo-Pod is designed to fit directly into the visor of compatible suits and hoods, allowing the user full operational freedom.

Designed from the outset to be comfortable and simple to use, the Flo-Pod requires little familiarisation prior to use and is lightweight and quiet in operation.

Flo-Pod Components:
  • Motorised turbo unit
  • Scott P3 Filter
  • Four or eight hour rechargeable battery pack (belt mounted)
  • Battery charger with fast charge
  • Adjustable waist belt
  • Spanner for turbo locking nut

For Use With:

Flo-Pod Hood

Flo-Pod Suit

jackets-and-trousers
Jackets and trousers

Chemically protective, reusable jackets and trousers are available in a wide range of fabrics to provide the best possible protection in numerous industries.

Jackets feature nylon coarse tooth zips and a choice of hook and loop fastener or press stud zip flaps. Trousers include adjustable webbing shoulder braces with quick release buckles.

Jacket Options

Hood Variations

  • Elasticated Hood
  • Draw-String Hood

Collar Variations

  • Mandarin Collar
  • Short 2” Collar
  • Squared Collar

Cuff Variations

  • Elasticated cuff
  • Double elasticated cuff
  • Soft cuff and cones (gloves optional)
  • Locking cuff (gloves optional)

Note: Gloves are available as an option and will be supplied in a material compatible with the Jacket

Trouser Options

Leg Variations

  • Plain leg with hook and loop fastener adjuster
  • Elasticated inner ankle with stirrup, plain outer
  • Double elasticated ankle with stirrup on inner
  • Detachable Hazmaz™ safety boots
one-piece-chemical-suit
One piece suits

Reusable one-piece chemical protective suits are available in a wide range of fabrics to provide the best possible protection in numerous industries. Suits feature nylon coarse tooth zips and a choice of  hook and loop fastener or press stud zip flaps. Zip can be central or from thigh to collar.

Hood Variations (Cowl Suits)

  • Elasticated Hood
  • Drawstring Hood

Collar Variations (Siren Suits)

  • Mandarin Collar
  • Short 2” Collar
  • Squared Collar

Cuff Variations

  • Elasticated cuff
  • Double elasticated cuff
  • Soft cuff and cones (gloves optional)
  • Locking cuff (gloves optional)

Note: Gloves are available as an option and will be supplied in a material compatible with the Jacket

Leg Variations
  • Plain leg with hook and loop fastener adjuster
  • Elasticated inner ankle with stirrup, plain outer
  • Double elasticated ankle with stirrup on inner
  • Detachable Hazmaz™ safety boots
neck-flap
Neck cloths and wraps

For attachment to a safety helmet to provide neck protection from chemical splashes.

  • Available in a wide range of fabrics compatible with other garments in the chemical workwear range
  • Can be fitted to most makes of safety helmet
  • Designed for use where operators are dressed in either one-piece suits or jackets
  • Particularly suitable for refineries with overhead pipework where protection from overhead splashes is essential
  • Wrap around neck cloths offer greater face protection to the user
splash-hood
Anti-splash hood

Reusable anti-splash hoods are available in a range of materials to provide the best possible protection against numerous potentially hazardous situations.

  • Designed for short duration work
  • Highly chemically resistant visor
  • Air vents at the front and rear of the hood
  • Large front and rear capes providing protection to the chest area, secured by adjustable straps under the wearer’s arms
  • Hanging point bonded to the top of the hood to allow proper storage

Important Notes

  • Anti-Splash Hoods must not be worn in confined areas where there may be fumes or vapours, or the oxygen content in the air drops below 21%
  • Strenuous work that increases the wearer’s breathing rate should not be undertaken whilst wearing the hood.
chemprotex-300-combi
Chemprotex™ 300 combi suit

Lightweight, Type 3 liquid-tight, limited-life cowl suit, designed for use with a with a face mask and filter or appropriate face and head protection.

  • Compatible with the Permasure® Toxicity Modeller for calculation of safe working time with a given chemical based on real world conditions
  • One-piece construction in blue Chemprotex™ 300
  • Integral elasticated hood
  • Nylon zip, fitted vertically from groin to neck with twin flaps and hook and loop fastener to seal
  • Unique zip-flap arrangement ensures liquid tight performance without the need for taping the flap
  • Minimal taping required to achieve stated performance - unlike the majority of other suits that require taping at the wrist, ankle zip and facemask, the lightweight combi needs only a single piece of tape at the neck, dramatically reducing donning and doffing times
  • Elasticated legs
  • Double cuff with elasticated outer and soft elasticated inner for user comfort and thumb loop to ensure sleeves don’t ride up the arm in use
kemblok-gloves
Kemblok™ Gloves

Manufactured using a seven-layer chemical barrier laminate material, Kemblok™ gloves provide excellent protection against a wide range of chemicals including warfare agents and biological hazards.

  • Protection against chemicals and micro-organisms to EN 374-1:2003
  • Can be worn as a liner under heavier gloves providing mechanical protection
  • Lightweight and comfortable
  • Compatible with the Permasure™ toxicity modelling web application which calculates safe working times for over 4,000 chemicals
  • Working temperature -40C to 70C
  • Silicone and latex free
  • REACH compliant
hazmax-esd-boot
Hazmax™ electro-static discharge ESD boots

A chemically protective Electro-Static Discharge (ESD) boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. Suitable for applications such as pharmaceutical electro-protective areas.

Boot Shaft

  • Green Hazmax chemically resistant compound shaft certified to EN 13832
  • Conforms to EN 943-1 (Chemical protective clothing) and certified to this standard as part of an appropriate Respirex gas tight suit
  • Meets the requirements of NFPA 1991 (Chemical Vapour protection)
  • For use in EPA areas conforming to EN 61340-5
  • (ESD 99.6 M dry, 11.8 M wet EN ISO 20345)
  • 200 Joule Epoxy coated Steel toe cap to EN ISO 20345
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Knitted nylon lining
  • Comfort insole (removable and machine washable)
  • CE marked on the shaft with date and year of manufacture
  • REACH Compliant
hazmax-boot
Hazmax™ chemically protective boots

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance.

Boot Shaft

  • Green Hazmax chemically resistant compound shaft certified to EN 13832-3
  • Conforms to EN 943-1 (Chemical protective clothing)
  • 200 Joule Epoxy coated Steel toe cap
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Knitted nylon lining
  • Moisture absorbing insole (removable and machine washable)
  • Also available in black (MOQ of 500 pairs)

Boot Sole

  • Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Stainless steel, penetration resistant mid-sole
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C
  • Energy absorbing tunnel system
  • Cold insulation
hazmax-ys-boot
Hazmax™ YS boots

A chemically protective anti-static safety boot with an integral steel toe cap and penetration resistant midsole.

Boot Shaft

  • Green Hazmax chemically resistant compound shaft certified to EN 13832-3
  • Conforms to EN 943-1 (Chemical protective clothing) and certified to this standard as part of an appropriate Respirex gas tight suit
  • Meets the requirements of NFPA 1991 (Chemical Vapour protection)
  • 200 Joule Epoxy coated Steel toe cap to EN ISO 20345
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Knitted nylon lining
  • CE marked on the shaft with date and year of manufacture
  • REACH Compliant

Boot Sole

  • Slip resistance performance to EN 13287 SRA and SATRA TM144 standards
  • Cleated outsole for maximum grip
  • Stainless steel, penetration resistant mid-sole to EN ISO 20345 S5
  • Fuel and oil resistant to EN ISO 20345 FO
  • Energy absorbing tunnel system conforms to EN ISO 20345 E
  • Cold insulation to EN ISO 20345 CI
chemical-overboot
Chemical overboots

A chemically protective anti-static overboot with a vulcanized rubber sole for superior slip resistance.

Boot Shaft

  • Ingenious rear entry design ensures the boot is quick and easy to fit and remove
  • Ideal for personnel who have to continually enter and exit hazardous areas
  • Green Hazmax chemically resistant compound shaft certified to EN 13832
  • Conforms to EN 943-1 (Chemical protective clothing)
  • Meets the requirements of NFPA 1991 (Chemical Vapour protection)
  • Seamless construction
  • Kick off lug
  • CE marked on the shaft with date and year of manufacture
  • REACH Compliant

Boot Sole

  • Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C
dielectric-boot
Dielectric boots

An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.

Boot Shaft

  • Yellow dielectric compound shaft
  • 200 Joule Epoxy coated Steel toe cap to EN ISO 20345
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Non-wicking knitted nylon lining
  • Comfort insole (removable and machine washable)
  • REACH Compliant

Boot Sole

  • Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Cleated outsole for maximum grip
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300
  • Energy absorbing tunnel system conforms to EN 20345 E
  • Cold insulation to EN ISO 20345
dielectric-overboots
Dielectric overboots

An electrically insulating dielectric overboot approved to current European standards with a vulcanized rubber sole for superior slip resistance. The Respirex dielectric boot provides high voltage protection of up to 20kV over the complete boot for 8 hours.

Boot Shaft

  • Ingenious rear entry design ensures the boot is quick and easy to fit and remove
  • Ideal for personnel who have to continually enter and exit hazardous areas
  • Yellow dielectric compound shaft
  • Seamless construction
  • Kick off lug
  • REACH Compliant

Boot Sole

  • Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C
koolvest
Koolvest

The Respirex Koolvest™ is an innovative product conceived specifically to provide comfortable cooling to an individual in circumstances of increased temperature.

  • Manufactured in Proban® flame retardant material with 100% cotton shell
  • Absorbs heat generated by the wearer and maintains a comfortable cooling level of 65°F/18°C
  • Can be worn directly against the skin
  • One size fits all vest which is pulled tight to the body with adjustable straps.
  • Machine washable
  • Four internal pockets with hook and loop fastener tabs to contain the pre-charged KoolPacks.
  • KoolPacks contain a safe, non-toxic, non-flammable semi-solid thermal energy storage material
  • KoolPacks are simple to recharge in a fridge, portable cooler or even iced water
  • Vest supplied complete with 4 KoolPacks.
  • Single KoolPacks also available

PROBAN® is a registered trademark of Solvay Operations

single-decon-shower-outside
Decontamination showers

Lightweight and quick to deploy, the inflatable Decontamination Shower range from MFC Survival allow for rapid response.

Fully inflatable, these Decontamination Showers can be set up in a matter of minutes, and will stay standing without continuous inflation. With no mechanical framework the shelters are lightweight to transport and compact to store. The Decontamination Showers come in two different styles, with gloves or without gloves.

Optional raised floor panels prevent contact with contaminated shower wash-off, which is collected in a PVC chemically resistant sump. Sleeves for pumped extraction of contaminated water are included as standard.

Showers can be used on hard or soft standing, and guy ropes are provided for securing in position during inclement weather.

  • Light weight and compact
  • Rapid Inflation and deployment
  • Low Maintenance
  • Integral multi-nozzle shower systems for wash and rinse
  • Wash brush hose connection fittings
  • Clear PVC Doors
body-bag
Body bags

A gas tight body bag, designed to contain chemically contaminated mortalities and body parts after a CBRN incident.

  • Manufactured with a DuPont™ Tychem® TK shell, which provides excellent protection against a broad range of chemicals
  • Provides a physical barrier to particulate, liquid, vapour and gas materials with a minimum breakthrough of 48 hours
  • Lightweight material for ease of storing, transporting and handling
  • Durable material with an abrasion resistant reinforced PVC base
  • Enhanced CBRN filter (3M JFR-85) allowing gasses produced by the body as part of the decomposition process to pass out of the bag
  • Shut off valve over CBRN filter exhausts
  • Sturdy carrying straps allow up to four people in PPE to assist with lifting and carrying
  • Absorbent pads in the bottom of the bag capable of holding more than five litres of fluid
  • Heavy duty gas-tight zip around three sides of the bag for ease of access, fitted with DuPont™ Viton® ring on slider for ease of use when wearing CPPE gloves
  • Disposal by means of either cremation or burial
  • Clear hazard warning signs identifying the type of CRBN hazard within the bag
  • Two waterproof A4 pouches to allow identification paperwork to be attached to the body bag
  • Clear viewing window to allow relatives to view the deceased

DuPont™, Tychem® and Viton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

chubb-24-7-monitoring-and-response-center-6-shaded chubb-24-7-monitoring-and-response-center-6-shaded_sq
We are here to help you
Call or email our team of experts today.
Get in touch
Protecting your world
chubb-24-7-monitoring-and-response-center-1_sq
Security alarm monitoring
Your premises protected by Chubb are monitored 24/7 at our Grade A1 monitoring centres in Australia.
man-watching-security-monitors-2_sq
Fire alarm monitoring
Help ensure ongoing protection of your property and assets with professional fire alarm monitoring and response from Chubb in Australia.
chubb-24-7-monitoring-and-response-center-3_sq
Expert Support
Chubb has fire protection and security solutions to protect your world. To find out how we can help, please contact us.